Cisco Systems C7200 Enabling/Disabling the VSA, Disabling the VSA during Operation, disabled

Models: C7200

1 62
Download 62 pages 7.3 Kb
Page 20
Image 20
Enabling/Disabling the VSA

Chapter 1 Overview

Enabling/Disabling the VSA

Enabling/Disabling the VSA

This section includes the following topics:

Disabling the VSA during Operation, page 1-6

Enabling/Disabling Scheme, page 1-6

The VSA crypto card does not support OIR. The VSA boots up only during system initialization. The VSA will not work if it is inserted after the system is up and running. The VSA can be shut down by a disabling CLI command. The VSA is ready for removal after the disabling CLI command is executed.

Disabling the VSA during Operation

Before removing the VSA, we recommend that you shut down the interface so that there is no traffic running through the VSA when it is removed. Removing an VSA while traffic is flowing through the ports can cause system disruption.

Caution You could damage the VSA, if you remove the VSA without entering the CLI command.

To disable the C7200 VSA, use the following commands, starting in global configuration mode:

 

Command

Purpose

 

 

 

Step 1

no crypto engine [slot accelerator]

Disables the C7200 VSA.

 

0

 

 

 

 

Step 2

crypto engine [slot accelerator] 0

Enables the C7200 VSA after it has been

 

 

disabled.

 

 

Note See Table 1-5for more details.

 

 

 

Enabling/Disabling Scheme

This section describes how the VSA operates without OIR support.

Table 1-3describes what occurs when the system boots up after power-on or after the reload command is entered.

Table 1-4describes what occurs when the system is in run-time operation.

Table 1-5describes what occurs when the crypto engine command is entered.

Table 1-3 System Boots Up After Power-on or After the reload Command is Entered

Condition

System Initialization

 

 

VSA is present

The VSA subsystem comes up and initializes automatically. Other crypto

 

engines will be disabled.

 

 

VSA is not present

The VSA subsystem will not be initialized and system will use other crypto

 

engine if exist.

 

 

C7200 VSA (VPN Services Adapter) Installation and Configuration Guide

1-6

OL-9129-02

 

 

Page 20
Image 20
Cisco Systems C7200 Enabling/Disabling the VSA, Disabling the VSA during Operation, Enabling/Disabling Scheme, disabled