Cor, Enter | Cisco Systems Cisco Unity 3.1 instruction

Avaya Definity Gx/PBXLink Integration Guide for Cisco Unity 3.1

Programming the Avaya Definity/PBXLink Phone System

To set up coverage paths for more than eight voice messaging ports

Step 1	For a phone system with more than eight voice messaging ports, use the Add Vdn <extension number>
	command (for example Add Vdn 2000) to set up a vector directory number for the pilot number
	(extension 2000 in this example). Set the following options and press Enter.
	Table 10	Vector Direction Number Options

	Option			Setting

	Extension			<the pilot number>

	Name			VoiceMail 2000

	Display Override?			n

	COR			1

	Vector Number			1
				(must match the Number option in Table 11)

	Measured			none

Step 2	Use the Add Vector 1 or the Change Vector 1 command to define the vector for voice messaging port
	extensions that answer calls. Set the options according to one of the following examples Then press
	Enter.
	For a system with a single PBXLink digital port, use the following example of a system with six lines.
	Table 11	Vector Definition Options for a Single Digital Port

	Option		Setting

	Number		1
			(must match the Vector Number option in Table 10)

	Name		voicevec

	ASAI Routing?		n

	Basic?		y

	Prompting?		n

	01		wait time 0 secs hearing ringback

	02		route to number 2001 if unconditionally
			(use the first voice messaging port extension)

	03		route to number 2002 if unconditionally

	04		route to number 2003 if unconditionally

	05		route to number 2004 if unconditionally

	06		route to number 2005 if unconditionally

	07		route to number 2006 if unconditionally

	08		busy

For a system with two PBXLink digital ports, use the following example, which bridges every second extension to Port A and the remaining extensions to Port B.

Avaya Definity Gx/PBXLink Integration Guide for Cisco Unity 3.1

	OL-1846-06	11

Image 11

Cisco Systems Cisco Unity 3.1 manual Cor, Enter

Contents

Integration Steps Integration Tasks Cisco Unity Server RequirementsPhone System Integration Description Configuration for 24 or Fewer PortsConfiguration for 25 to 48 Ports Configuration for 49 to 72 Ports PBXLink Box Connections Number of Voice Messaging Ports to Install Integration Features Number of Voice Messaging Ports That Will Answer Calls Programming the Avaya Definity/PBXLink Phone System Option Option SettingTo program the Avaya Definity/PBXLink phone system Inspect Call-appr Button Assignment SettingCall-appr Normal Abrdg-appr Extn 3rd voice mail extension Feature Button Number SettingAbrdg-appr Extn 1st voice mail extension Abrdg-appr Extn 2nd voice mail extension Abrdg-appr Extn 5th voice mail extension Abrdg-appr Extn 4th voice mail extensionAbrdg-appr Extn 7th voice mail extension Every third remaining voice mail extension Enter COR Vector Definition Options for Call Vector Avaya Definity Gx/PBXLink Integration Guide for Cisco Unity To set up user phones Click PBXLinkFirmwareUpdate Setting up the PBXLink BoxTo Update the PBXLink Box Firmware Select Configuration and press Enter To set up the PBXLink box LTN Number Voice Messaging Port Value To set up the port LTNs for two PBXLink digital portsTo set up the port LTNs for three PBXLink digital ports 0007 Switch Parameter Required Setting Configuring Cisco Unity for the IntegrationTo confirm that the integration is enabled Go to System Licensing Licensed Features To Set Up the Test Configuration Testing the Integration To Test an Internal Call with Release Transfer To Test an External Call with Release Transfer To Test Supervised Transfer To Set Up Supervised Transfer on Cisco UnityTo Return Example Subscriber to the Default Settings Requirements Integrating a Secondary Server for Cisco Unity Failover Integration Description Setting Up the Secondary Server for FailoverTo Set Up the Secondary Server for Failover Dual Phone System Integration Overview Integration Steps When No Phone Systems Are Installed Reinstall the TSP. See the To Reinstall the TSP procedure on Changing Cisco Unity Administrator Settings To Modify Voice Port Settings To specify switch settings for Cisco CallManagerGo to System Switch IP Switch Page To Remove the Existing TSP Changing the Number of Installed Ports To Reinstall the TSP About the Remapping FeatureSetting Up Cisco Unity to Remap Extension Numbers To Remap Extension Numbers Rule Original Number New Number Syntax and ExamplesWildcard To Set the Port Assignments in the Registry Ctrl-Alt-Delete System Configuration SettingsConventions Convention Description Documentation DVD Obtaining DocumentationCisco.com Ordering Documentation Documentation FeedbackCisco Product Security Overview Cisco Technical Support Website Reporting Security Problems in Cisco ProductsObtaining Technical Assistance Definitions of Service Request Severity Submitting a Service Request Obtaining Additional Publications and Information