2-9
Cisco Video Surveillance System 2621 IP Dome User Guide
OL-24129-02
Chapter 2 Getting Started
Installing the Cisco Video Surveillance 2621 IP Dome
Figure 2-5 Attaching the Privacy Shield and Dome
Step 12 Attach the dome assembly by aligning its tab with the opening in the base plate, pressing it into place,
and securing the three TORX screws (see Figure 2-5).
Make sure that the security strap that connects the dome assembly to the camera housing is in place.
Mounting with a Conduit Base
You can mount the 2621 IP dome with an optional conduit base (CIVS-IPCA-1006=) in situations where
you cannot cut a hole through a surface for cables or where cables run through a small hole in a surface.
1Base plate
2Camera Unit
3Privacy Shield
4Dome assembly
5TORX screws