Cisco Systems CIVS-IPC-2621V manual Snmp Window

Chapter 3 Configuring and Managing the IP Camera

Applications Windows

Table 3-17	Event Window Options (continued)
Option		Description
Video Format		Appears if you choose the Video option from the Attachment Type
(MPSG-4)		drop-down list.
		Choose the format (asf, mp4, or 3gp) for the video file of the event. If you
		choose mp4, or 3gp, video files do not include audio.
Pre-Capture Length		Length, in seconds, of additional video that is included in the video file
		immediately before the event.
		The default value is 0 (no pre-capture video).
Post-Capture Length		Length, in seconds, of additional video that is included in the video file
		immediately after the event.
		The default value is 5.

SNMP Window

The SNMP window allows you to configure Simple Network Management Protocol (SNMP) settings for the IP camera. These settings can help you manage complex networks by sending messages to different devices on the network.

To display the SNMP window, access the configuration windows as described in the “Accessing the IP Camera Windows” section on page 2-25, click Applications, then click SNMP.

If you change any options in the SNMP window, you must click Save to save the changes. To discard the changes, click Cancel before clicking Save. These buttons appear at the bottom of the window. You may need to scroll down to see them.

Table 3-18describes the options in the SNMP window.

Table 3-18 SNMP Window Options

Option	Description
SNMP Enable	Check this check box to enable SNMP.
System Object ID	Display only. Displays the system object ID, which identifies system
	properties of the IP camera.
System Contact	Enter system contact information for the system administrator. For example,
	enter the e-mail address of the system administrator.
SysLocation	Enter system location information, which identifies the physical location of
	the IP camera.
Read Community String	Enter the SNMP read community string, which identifies the valid read
	community.
	The default value is public (all lower case).
Primary Trap Receiver	Enter the IP address of primary trap receiver of the SNMP manager.
Secondary Trap	Enter the IP address of secondary trap receiver of the SNMP manager.
Receiver

	Cisco Video Surveillance System 2621 IP Dome User Guide
3-34	OL-24129-02