Chapter 3 Configuring and Managing the IP Camera

Audio/Video Windows

Audio/Video Windows

The Audio/Video windows provide options for configuring audio and video from the IP camera.

The following sections describe the Audio/Video windows in detail:

Video Window, page 3-16.

Audio Window, page 3-23

Privacy Region Window, page 3-24

Focus/Zoom Window, page 3-24

Video Window

The Video window provides options for configuring the video from the IP camera. You can configure settings for the primary and an optional secondary video stream.

Configuring a secondary stream is useful for providing third-party devices or software with a video stream that is at a lower resolution than the primary. Some devices and software require this lower resolution. For related information, see the “Viewing Video through Third-Party Devices or Software” section on page 4-5.

To display the Video window, access the configuration windows as described in the “Accessing the IP Camera Windows” section on page 2-25, click, Audio/Video, then click Video.

If you change any options in the Video window, you must click Save to save the changes. To discard the changes, click Cancel before clicking Save. These buttons appear at the bottom of the window. You may need to scroll down to see them.

Table 3-9describes the options in the Video window.

 

Cisco Video Surveillance System 2621 IP Dome User Guide

3-16

OL-24129-02

Page 58
Image 58
Cisco Systems CIVS-IPC-2621V manual Audio/Video Windows