Installation Preparations

How Do I Mount the Cable Modem on a Wall? (Optional)

If you wish, you can mount the cable modem to a wall. This section describes how to mount the cable modem to a wall, and includes a list of equipment you will need along with suggestions for choosing an appropriate place to mount the cable modem.

Important: If you have not already done so, insert the battery in the cable modem before you mount the cable modem on a wall (if desired) or before you install the cable modem in your home. For assistance inserting the battery in the cable modem, go to Install the Battery (on page 13).

Select an Appropriate Place to Mount the Cable Modem

You may mount the cable modem to a wall that is made of cement, wood, or drywall. When choosing an appropriate mounting place, refer to the following recommendations:

Ensure that the mounting location is free of obstructions on all sides, and the cables should be able to easily reach the cable modem without strain.

Leave sufficient clearance between the bottom of the cable modem and any flooring or shelving underneath to allow access to cabling.

Allow enough slack in all cables so that the cable modem can be removed for any required maintenance without disconnecting the cables.

Choose a location that allows adequate ventilation around the cable modem.

Equipment Needed

Verify that you have the following items that you will need to mount the cable modem:

Two wall anchors for #8 x 1-inch screws

Two #8 x 1-inch pan head sheet metal screws

Drill with a 3/16-in. wood or masonry bit, as appropriate for the wall composition

A copy of the wall-mounting illustrations shown on the following pages

Position the Cable Modem

Use the following illustrations to guide you in positioning the cable modem on the wall.

4027620 Rev A

15

Page 39
Image 39
Cisco Systems DPC3208 manual How Do I Mount the Cable Modem on a Wall? Optional, Equipment Needed, Position the Cable Modem