Cisco Systems IE3010 Configuring Smartports Macros

CHAPTE R
13-1
Cisco IE 3010 Switch Software Configuration Guide
OL-23145-01
13
Configuring Smartports Macros
The IE 3010 switch command reference has command syntax and usage information.
• Understanding Smartports Macros, page 13-1
• Configuring Smartports Macros, page 13-1
• Displaying Smartports Macros, page 13-5
Understanding Smartports Macros
Smartports macros provide a convenient way to save and share common configurati ons. You can use
Smartports macros to enable features and settings based on the location of a switch in the network and
for mass configuration deployments across the network.
Each Smartports macro is a set of CLI commands that you define. Smartports macros do not contain new
CLI commands; they are simply a group of existing CLI commands .
When you apply a Smartports macro to an interface, the CLI commands within the macro are configured
on the interface. When the macro is applied to an interface, the existing interface configurations are not
lost. The new commands are added to the interface and are saved in the running configuration file.
Configuring Smartports Macros
• Default Smartports Configuration, page 13-1
• Smartports Configuration Guidelines, page 13-2
• Applying Smartports Macros, page 13-3
Default Smartports Configuration
There are no Smartports macros enabled on the switch.