Cisco Systems IE3010 Applying Smartports Macros

13-3

Cisco IE 3010 Switch Software Configuration Guide

OL-23145-01

Chapter 13 Configuring Smartports Macros

Configuring Smartports Macros

Applying Smartports Macros

Beginning in privileged EXEC mode, follow these steps to apply a Smartports m acro:

Command Purpose

Step 1 show parser macro Display the Cisco-default Smartports macros embedded in the switch

software.

Step 2 show parser macro name macro-name Display the specific macro that you want to apply.

Step 3 configure terminal Enter global configuration mode.

Step 4 macro global {apply | trace}

macro-name [parameter {value}]

[parameter {value}] [parameter

{value}]

Apply each individual command defined in the macro to the switch by

entering macro global apply macro-name. Specify macro global trace

macro-name to apply and to debug a macro to find any syntax or

configuration errors.

Append the macro with the required values by using the parameter

value keywords. Keywords that begin with $ require a unique parameter

value.

You can use the macro global apply macro-name ? command to display

a list of any required values for the macro. If you apply a macro without

entering the keyword values, the commands are invalid and are not

applied.

(Optional) Specify unique parameter values that are specific to the

switch. You can enter up to three keyword-value pairs. Parameter

keyword matching is case sensitive. The corresponding value replaces

all matching occurrences of the keyword.

Step 5 interface interface-id (Optional) Enter interface configuration mode, and specify the interface

on which to apply the macro.

Step 6 default interface interface-id (Optional) Clear all configuration from the specified interface.

Step 7 macro {apply | trace} macro-name