Cisco Systems MAS-7K, MAS-7507 manual Cisco 7000 and Cisco Chassis Replacement Instructions

Doc. No. 78-1064-02

Cisco 7000 and Cisco 7507

Chassis Replacement Instructions

Product Numbers: CHAS-7K, MAS-7K, CHAS-7507, MAS-7507

Customer Order Number: DOC-781064=

This document contains instructions for replacing a Cisco 7000 and Cisco 7507 chassis as a spare part.

Note With a few exceptions, the chassis replacement procedures are identical for both chassis; therefore, throughout this document, both chassis are referred to as the chassis; the exceptions are clearly noted.

You will remove the processor modules and power supplies from your existing chassis and install them in the replacement chassis. The term processor modules refers to the RP, SP (or SSP), and interface processors in the Cisco 7000, and the RSP2 and interface processors in the Cisco 7507.

These instructions are applicable only to systems that are already operational and for which first-time installation and startup verification has been performed. If you have not already installed the system and verified that it operates properly, or if you are moving the chassis to a new location, refer to the Cisco 7000 Hardware Installation and Maintenance or Cisco 7507 Hardware Installation and Maintenance publications for installation information.

The sections in this document include the following:

•

•

•

•

•

•

•

Product Overview, page 2

Prerequisites, page 6

Unpacking the Chassis, page 11

Replacing a Rack-Mounted Chassis, page 11

Moving System Components, page 18

Verifying the Installation, page 24

Cisco Information Online, page 48

Copyright © 1995 1

Cisco Systems, Inc.

All rights reserved.