Cisco Systems MGX 8000 manual Cisco MGM Software Requirements, Cisco MGM Server, Resource

Chapter 2 Installation

System Requirements

Table 2-1 Cisco MGM Platform Requirements (continued)

	Cisco MGM Server
Resource	Small Installation	Large Installation	Cisco MGM Client
Processor	2 x 450 MHz	4 x 440MHz	440 MHz
Swap space	4 GB1	8 GB1	2 GB
Monitor	17-inch color	17-inch color	17-inch color
Graphics card	24-bit	24-bit	24-bit
Power supply	1	2 (second power supply optional	1
		for high availability installations)
Miscellaneous	Local or remote CD ROM	Local or remote CD ROM	Local or remote CD ROM
Resources	DAT tape backup	DAT tape backup

1. If CiscoView is running on the same system as Cisco MGM, you will need an additional 1 GB swap space.

Cisco MGM Software Requirements

Cisco MGM 2.0 requires the following software components:

•Cisco EMF Release 3.2 Patch 1.4

•Netscape 4.76 for Solaris (included and automatically installed with Cisco EMF 3.2)

•CiscoView 5.4

•WANCV package release 3.60 (included with Cisco MGM 2.0 package)

Note Solaris patch 108528-14 is required for critical performance improvement. Without installing this patch, Cisco MGM will function. However, installation of 108528-14 will improve Cisco MGM performance by approximately 70 percent.

Cisco MGX 8000 Series Software Requirements

Cisco MGM 2.0 manages Cisco MGX 8000 Series gateways based on the Cisco Processor Switch Module (PXM1). Cisco MGM 2.0 also provides management of VISM, VISM-PR, RPM-PR, SRM, and SRM-E cards. Table 2-2shows the matrix of card software requirements for Cisco MGM 2.0.

Table 2-2 Cisco MGX 8000 Series Software Requirements for CMGM 2.0

PXM1 Release 1.1.40	VISM Release 2.2
	RPM-PR Release 1.2.2
PXM1 Release 1.2.00	VISM Release 2.2
	RPM-PR Release 1.2.2
PXM1 Release 1.2.10	VISM Release 3.0
	VISM-PR Release 3.0
	RPM-PR Release 1.2.2

Cisco Media Gateway Manager User Guide

2-4 78-11705-02