Cisco Systems OL-1377-02 manual Mac OS 9.x Install Screen

Chapter 3 Installing the Driver, Client Utility, and Client Adapter

Installing the Driver and Client Utility

For Mac OS X, you should install the client adapter into your PowerBook or PowerMac before installing the driver and client utility. Follow the instructions in the “Inserting the Client Adapter into a Computing Device” section on page 3-8to insert the client adapter into your PowerBook or PowerMac.

Follow the steps below to install the driver and client utility:

Step 1 Open the folder on your hard driver where you expanded the driver and utility (*.sit) file.

Step 2 Double-click Cisco WLAN Install to activate the installer.

Note You should keep the Cisco WLAN Install file. The file may be needed in the future to possibly uninstall your client utility and driver for a clean install.

Step 3 If you are using Mac OS X, when the Authenticate screen appears, enter your password in the Password field. Your Macintosh user name will appear in the Name field. Click OK.

Note To install the client utility on Mac OS X, you must have administrator privileges for the Macintosh.

Step 4 When the Cisco Aironet Wireless LAN Adapter Software screen appears, click Continue.

Step 5 Read the terms and conditions of the Software License Agreement and click Accept or Decline. If you decline the license agreement, the client utility installation ends.

Note You can print or save the software license agreement by clicking Print or Save As.

Step 6 Read the Read Me screen information and click Continue.

Note You can print or save the read-me information by clicking Print or Save As.

The Cisco WLAN Installer detects your computer operating system and displays the appropriate installation screen (see Figure 3-1for Mac OS 9.x or Figure 3-2for Mac OS X).

Figure 3-1 Mac OS 9.x Install Screen

Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for Mac OS

OL-1377-02 3-3