Implementing Routing Policy on Cisco IOS XR Software
Information About Implementing Routing Policy on CiscoIOS XR Software
RC-400
Cisco IOS XR Routing Configuration Guide
OL-14356-01
route-policy isis-propagate
if destination in (10.0.0.0/8 ge 8 le 25) then
pass
endif
end-policy
router isis instance_10
address-family ipv4 unicast
propagate level 1 into level 2 policy isis-propagate
.
.
.

IS-IS Attributes and Operators

Table 5 summarizes the IS-IS attributes and operators.
EIGRP Policy Attach Points
This section describes each of the EIGRP policy attach points and provides a summary of the EIGRP
attributes and operators.
•Default-Accept-In, pageRC-401
•Default-Accept-Out, pageRC-401
•Policy-In, pageRC-401
•Policy-Out, page RC-402
•If-Policy-In, pageRC-402
•If-Policy-Out, pageRC-402
•Redistribute, page RC-402
Table5 IS-IS Attributes and Operators
Attach Point Attribute Match Set
redistribution tag is, eq, ge, le set
route-type is n/a
destination in n/a
next-hop in n/a
mpls-label1
1. The mpls-label attribute is implicit in the conditional syntax; it is implied by the route-has-label operator.
route-has-label n/a
level n/a set
isis-metric n/a set
metric-type n/a set
default-information
originate
rib-has-route in n/a
level n/a set
isis-metric n/a set
tag n/a set
inter-area-propagate destination in n/a