Implementing Static Routes on Cisco IOS XR Software
How to Implement Static Routes on CiscoIOS XR Software
RC-431
Cisco IOS XR Routing Configuration Guide
OL-14356-01
DETAILED STEPS
Command or Action Purpose
Step1 configure
Example:
RP/0/RP0/CPU0:router# configure
Enters global configuration mode.
Step2 router static
Example:
RP/0/RP0/CPU0:router(config)# router static
Enters static route configuration mode.
Step3 vrf vrf-name
Example:
RP/0/RP0/CPU0:router(config-static)# vrf vrf_A
Enters VRF configuration mode.
Step4 address-family {ipv4 | ipv6} {unicast |
multicast}
Example:
RP/0/RP0/CPU0:router(config-static-vrf)#
address family ipv6 unicast
Enters address family mode.
Step5 prefix mask [vrf vrf-name] {ip-address |
interface-type interface-instance} [distance]
[description text] [tag tag] [permanent]
Example:
RP/0/RP0/CPU0:router(config-static-vrf-afi)# 20
01:0DB8::/32 2001:0DB8:3000::1 201
Configures an administrative distance of 201.
Step6 end
or
commit
Example:
RP/0/RP0/CPU0:router(config-static-vrf-afi)# en
d
or
RP/0/RP0/CPU0:router(config-static-vrf-afi)#
commit
Saves configuration changes.
•When you issue the end command, the system prompts
you to commit changes:
Uncommitted changes found, commit them before
exiting(yes/no/cancel)?
[cancel]:
–
Entering yes saves configuration changes to the
running configuration file, exits the configuration
session, and returns the router to EXEC mode.
–
Entering no exits the configuration session and
returns the router to EXEC mode without
committing the configuration changes.
–
Entering cancel leaves the router in the current
configuration session without exiting or
committing the configuration changes.
•Use the commit command to save the configuration
changes to the running configuration file and remain
within the configuration session.