Cisco Systems OL-6415-04 manual Encapsulation dot1q vlan-id

Chapter 8 Configuring VLANs

Configuring VLANs

	Command	Purpose
Step 7
	encapsulation dot1q vlan-id	Enable a VLAN on the radio interface.
	[native]	(Optional) Designate the VLAN as the native VLAN. On many
		networks, the native VLAN is VLAN 1.
Step 8
	exit	Return to global configuration mode.
Step 9
	interface fastEthernet0.x	Enter interface configuration mode for the Ethernet VLAN
		subinterface.
Step 10
	encapsulation dot1q vlan-id	Enable a VLAN on the Ethernet interface.
	[native]	(Optional) Designate the VLAN as the native VLAN. On many
		networks, the native VLAN is VLAN 1.
Step 11
	end	Return to privileged EXEC mode.
Step 12
	copy running-config startup-config	(Optional) Save your entries in the configuration file.

This example shows how to:

•Name an SSID

•Assign the SSID to a VLAN

•Enable the VLAN on the radio and Ethernet ports as the native VLAN

router# configure terminal router(config)# interface dot11radio0 router(config-if)# ssid batman router(config-ssid)# vlan 1 router(config-ssid)# exit router(config)# interface dot11radio0.1 router(config-subif)# encapsulation dot1q 1 native router(config-subif)# exit

router(config)# interface fastEthernet0.1 router(config-subif)#encapsulation dot1q 1 native router(config-subif)#exit

router(config)# end

Cisco Wireless ISR and HWIC Access Point Configuration Guide

8-6 OL-6415-04