Cisco Systems PA-2FE-FX, PA-2FE-TX manual fastethernet and slot/port, shutdown

Chapter 4 Configuring the PA-2FE

Configuring the Interfaces

Step 3 Shut down interfaces by entering the interface fastethernet command (followed by the interface address of the interface), and then enter the shutdown command. Table 4-1shows the command syntax for the shutdown command for the supported platforms.

When you have finished, press Ctrl-Z—hold down the Control key while you press Z—or enter end or exit to exit configuration mode and return to the EXEC command interpreter.

Table 4-1 Examples of the shutdown Command for the Supported Platforms

Platform	Command	Example
Cisco 7120 series routers	interface, followed by the type	The example is for interface 0 and interface 1 on a
	(fastethernet) and slot/port	PA-2FE in port adapter slot 3.
	(port-adapter-slot-number/	Router(config)# interface fastethernet 3/0
	interface-port-number)
		Router(config-if)# shutdown
		Router(config-if)#interface fastethernet 3/1
	shutdown	Router(config-if)# shutdown
		Ctrl-Z
		Router#
Cisco 7140 series routers	interface, followed by the type	The example is for interface 0 and interface 1 on a
	(fastethernet) and slot/port	PA-2FE in port adapter slot 4.
	(port-adapter-slot-number/	Router(config)# interface fastethernet 4/0
	interface-port-number)
		Router(config-if)# shutdown
		Router(config-if)#interface fastethernet 4/1
	shutdown	Router(config-if)# shutdown
		Ctrl-Z
		Router#
Cisco 7200 series routers and	interface, followed by the type	The example is for interface 0 and interface 1 on a
Cisco 7200 VXR routers	(fastethernet) and slot/port	PA-2FE in port adapter slot 6.
	(port-adapter-slot-number/	Router(config)# interface fastethernet 6/0
	interface-port-number)
		Router(config-if)# shutdown
		Router(config-if)#interface fastethernet 6/1
	shutdown	Router(config-if)# shutdown
		Ctrl-Z
		Router#
Cisco uBR7200 series routers	interface, followed by the type	The example is for interface 0 and interface 1 on a
	(fastethernet) and slot/port	PA-2FE in port adapter slot 2.
	(port-adapter-slot-number/	Router(config)# interface fastethernet 2/0
	interface-port-number)
		Router(config-if)# shutdown
		Router(config-if)#interface fastethernet 2/1
	shutdown	Router(config-if)# shutdown
		Ctrl-Z
		Router#
Cisco 7201 router	interface, followed by the type	The example is for interface 0 and interface 1 on a
	(fastethernet) and slot/port	PA-2FE in port adapter slot 1.
	(port-adapter-slot-number/	Router(config)# interface fastethernet 1/0
	interface-port-number)
		Router(config-if)# shutdown
		Router(config-if)#interface fastethernet 1/1
	shutdown	Router(config-if)# shutdown
		Ctrl-Z
		Router#

PA-2FE-TX and PA-2FE-FX Two-Port Fast Ethernet Port Adapter Installation and Configuration

OL-3474-07 4-3