Cisco Systems 10BASE-FL, PA-5EFL= manual Router# show version

Configuring the 5EFL Interfaces

The show version (or show hardware) command displays the configuration of the system hardware (the number of each interface processor type installed), the software version, the names and sources of configuration files, and the boot images. Following is an example of the show version command used with a Cisco 7500 series system:

Router# show version

Cisco Internetwork Operating System Software

IOS (tm) GS Software (RSP-A), Version 11.1(472) [mpo 105]

Copyright (c) 1986-1995 by cisco Systems, Inc.

Compiled Fri 06-Oct-95 12:22 by mpo

Image text-base: 0x600088A0, data-base: 0x605A4000

ROM: System Bootstrap, Version 5.3(16645)

honda uptime is 4 hours, 22 minutes System restarted by reload

System image file is "slot0:rsp-a111-1", booted via slot0

cisco RSP2 (R4600) processor with 32768K bytes of memory. R4600 processor, Implementation 32, Revision 2.0

Last reset from power-on G.703/E1 software, Version 1.0. Bridging software.

X.25 software, Version 2.0, NET2, BFE and GOSIP compliant. Chassis Interface.

1 VIP2 controllers (5 Ethernet)(4 Serial).

5 Ethernet/IEEE 802.3 interfaces.

4 Serial network interfaces.

125K bytes of non-volatile configuration memory.

20480K bytes of Flash PCMCIA card at slot 0 (Sector size 128K). 8192K bytes of Flash internal SIMM (Sector size 256K).

No slave installed in slot 6. Configuration register is 0x2

For complete descriptions of interface subcommands and the configuration options available for VIP2-related interfaces, and which support VIP2 functionality, refer to the publications listed in the section “If You Need More Information” on page 2.

PA-5EFL Ethernet 10BASE-FL Port Adapter Installation and Configuration 23