Cisco Systems VIP-4R/4T manual Blower module Cable-management bracket, Power supplies, receptacles

Versatile Interface Processor Functions

Figure 6 shows the rear of the Cisco 7513 with two AC-input power supplies installed. Two slots (6 and 7) are reserved for the second generation Route Switch Processor (RSP2), which contains the system processor and performs packet switching functions. Slots 0 through 5 and 8 through 12 are for interface processors.

Figure 6 Cisco 7513, Interface Processor End

Blower module

Cable-management bracket

Card cage and processor modules

Air intake vent

AC	FAN	OUTPUT
OK	OK	FAIL

Power supplies	POWER
	A
Chassis grounding	I
receptacles	0

NORMAL
		ENABLE
EJECT
SLOT	1
SLOT0
SLAVEMASTER
SLAVE/MASTER
CPU	HALT
RESET		ENABLE
AUX.

CONSOLE	ROUTE
	SWITCHPROCESSOR2

AC	FAN	OUTPUT
OK	OK	FAIL

POWER

B

I

0

H5268

VIP-4R/4T Installation and Configuration 9