VIP Port Adapter Functions
Figure 20 shows some of the slot port adapter and interface ports of a sample Cisco 7505 system. For example, the addresses for the 4R interface ports on the first port adapter are 3/0/0 through 3/0/3 (chassis slot 3, port adapter slot 0, and interface ports 0 through 3).
The first port adapter slot number is always 0. The second port adapter slot number is always 1. The individual interface port numbers always begin with 0. The number of additional ports depends on the number of ports on a port adapter.
Note If you remove the
Figure 20 4R Token Ring Interface Port Number Example (Cisco 7505 Shown)
4R port adapter
(port numbers 3/0/0, 3/0/1, 3/0/2, 3/0/3, from left to right)
|
|
|
|
|
| EJECT | SLOT | 1 |
|
NORMAL |
|
|
|
|
|
|
| 0 | |
|
|
|
|
|
| SLOT |
| ||
ENAB | IN | USE | MB | 0 | 1 |
| 2 |
|
|
4/16 |
|
|
|
|
|
| |||
2 | 2 |
|
|
|
|
|
|
|
|
3
| HALT |
| ROUTE SWITCH PROCESSOR |
CPU | RESET |
| |
| CONSOLE | ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| FAST SERIAL | |
TD | TC | RD | RC LB CD | TD | TC | RD | RC LB CD | TD | TC | RD | RC LB CD | TD | TC | RD | RC LB CD |
TD |
|
| Slot 3 | Interface |
|
| ||
|
| Slot 2 | |
|
| ||
|
| Slot 1 | processor |
|
| slots | |
|
| ||
|
| Slot 0 |
|
|
|
| |
H5987 |
|
Note Current VIP configurations support only one 4R port adapter and one 4T port adapter. Single and dual 4R configurations are currently not available.
You can identify interface ports by physically checking the slot/port adapter/interface port location on the back of the router or by using software commands to display information about a specific interface or all interfaces in the router.
To display information about a specific interface, use the show interfaces command with the interface type and port address in the format show interfaces [type slot/port adapter/port].
40