Cisco Systems C3850NM210G Rack-Mounting, Installing a Network Module in the Switch, Overview

2-17

Contents

	RJ-45 Console Port		1-23
	Management Options	1-23
	Network Configurations			1-24
	Switch Installation 2-1
C H A P T E R 2
	Preparing for Installation 2-1
	Safety Warnings	2-1
	Installation Guidelines		2-3
	Tools and Equipment		2-4
	Verifying Switch Operation			2-4
	Powering Off the Switch				2-4
	Planning a Switch Data Stack			2-4
	Switch Stacking and Power Stacking Guidelines						2-5
	Data Stack Cabling Configurations				2-5
	Data Stack Bandwidth and Partitioning Examples						2-6
	Power-On Sequence for Switch Data Stacks 2-7
	Planning a StackPower Stack			2-8
	StackPower Stacking Guidelines					2-8
	StackPower Cabling Configurations				2-9
	StackPower Partitioning Examples					2-11
	Installing the Switch	2-11
	Rack-Mounting2-12
	Attaching the Rack-Mount Brackets 2-13
	Mounting the Switch in a Rack					2-15
	Table- or Shelf-Mounting			2-16
	After Installing the Switch			2-16

Connecting to the StackWise Ports

Connecting to the StackPower Ports 2-18

Installing a Network Module in the Switch 2-19

			Installing and Removing SFP and SFP+ Modules 2-19
			Connecting Devices to the Ethernet Ports 2-19
			10/100/1000 Ethernet Port Connections		2-19
			PoE+ and Cisco UPOE Port Connections		2-20
			Where to Go Next 2-21
			Installing a Network Module
C H A P T E R 3				3-1
			Overview 3-1
			Network Module LEDs	3-4
		Catalyst 3850 Switch Hardware Installation Guide
	iv				OL-26779-02