Cisco Systems WSC385024TS Installing the Switch, StackPower Partitioning Examples, 344188, 344189

Chapter 2 Switch Installation

Installing the Switch

StackPower Partitioning Examples

Figure 2-9and Figure 2-10show StackPower stacks of Catalyst 3850 switches with failover conditions. In Figure 2-9, the StackPower cable 2 is faulty. Therefore, this stack does not provide redundancy.

Figure 2-9 Example of a StackPower Stack with a Failover Condition

1

2

3

344188

In Figure 2-10, StackPower port B on the center switch has failed and this stack partitions into two stacks. The top two switches share power, and the bottom switch is now a separate stack.

Figure 2-10 Example of a Partitioned StackPower Stack with a Failover Condition

1

2

344189

Installing the Switch

•Rack-Mounting, page 2-12

•Table- or Shelf-Mounting, page 2-16

•After Installing the Switch, page 2-16

The illustrations shown in this section show the Catalyst 3850-48 PoE+ switch as an example. You can install other Catalyst 3850 switches following the same procedures.

	Catalyst 3850 Switch Hardware Installation Guide
OL-26779-02		2-11