Cisco Systems WSC385024TS Installing a DC Power Supply, Wiring the DC Input Power Source, page

Chapter 4 Power Supply Installation

Installing a DC Power Supply

Figure 4-6 Inserting the AC-Power Supply in the Switch

PWR-C1-715WAC

CONSOLE MGMT

PWR-C1-715WAC

344192

Step 6 (Optional) Make a loop in the power cord and thread it through the power cord retainer (Figure 4-7).

Figure 4-7 AC-Power Supply with Power Cord Retainer

PWR-C1-715WAC

PS OK

AC OK

PWR-C1-715WAC

PS OK

AC OK

334332

Step 7 Connect the power cord to the power supply and to an AC power outlet. Turn on the power at the power source.

Step 8 Confirm that the power supply AC OK and PS OK LEDs are green. See Table 1-16for a description of the power supply module LEDs.

Installing a DC Power Supply

•Equipment That You Need, page 4-8

•Grounding the Switch, page 4-8

•Installing the DC Power Supply in the Switch, page 4-11

•Wiring the DC Input Power Source, page 4-11

Warning An exposed wire lead from a DC-input power source can conduct harmful levels of electricity. Be sure that no exposed portion of the DC-input power source wire extends from the terminal block plug.

Statement 122

Catalyst 3850 Switch Hardware Installation Guide

OL-26779-02 4-7