g)Configuring the Cisco VPN Client
i)Navigate to the installed client by going to StartÆProgramsÆCisco Systems VPN ClientÆVPN Client
ii)Click on “New”
iii)Choose a name for the connection, and then refer to the email sent by the XO Managed Security Engineer to fill in the rest of the required information.
(1)Host: IP Address
(2)Group Authentication:
(a)Group Name and Password
iv) Navigate to the “Transport” tab
Copyright 2004 XO. All rights reserved. XO and the XO design logo are trademarks of XO Communications, Inc . | 6 |
