ESC ! n

[Function]

Collective Specifying Printing Mode

 

 

[Code]

<1B>H<21>H<n>

 

 

[Range]

{0 =< n =< FF(Hex)}

 

 

[Outline]

Printing mode is assigned.

 

 

 

 

 

 

 

 

Bit

Function

Value

 

0

1

 

 

 

 

0

Character Font

Font A

Font B

 

1

Undefined

 

 

 

2

Undefined

 

 

 

3

High-lighting

Canceled

Specified

 

4

Double height

Canceled

Specified

 

5

Double width

Canceled

Specified

 

6

Undefined

 

 

 

7

Underline

Canceled

Specified

 

 

 

 

 

 

Each n bit indicates the following:

 

 

[Caution]

• With double height and double width being specified simultaneously, double wide

 

and double high characters are consisted.

 

 

An underline is attached to the full character width, which, however, is not attached to the part having been skipped by the horizontal tab.

Neither is it attached to 90°-right-turned characters.

The underline width is as having been specified by <ESC ->. (The default setting is 1 dot width.)

n case that double wide character and normal character exist in same one line, the layout of underline is consistent one.

[Default]

n = 0

[See Also]

ESC E, ESC –

— 9 —

Page 11
Image 11
Citizen CMP-10 manual ESC ! n, Bit Function Value, Default See Also