Citizen CMP-10 manual Esc @, Sample Program

ESC @

[Function]	Initializing the Printer
[Code]	<1B>H<40>H
[Outline]	Clears data stored in the print buffer and brings various settings to the initial state
	(Default state). Items not cleared are as shown below.
	•	Data inside the internal input buffer are not cleared.
	•	Does not clear any data in the internal input buffer.
	•	Does not clear downloaded characters.
	•	Does not clear defined downloaded characters.
	•	Does not clear defined downloaded bit image.
	•	Does not clear defined macro.
	•	Does not clear setting for print density.
	•	Does not clear baud rate setting of serial port.
	•	Does not clear valid/invalid setting for panel switch.
	•	Does not clear ASB mode setting.
	•	Does not clear setting for auto power-off time.
	•	Does not clear memory switch.
[Caution]	At power off, the following settings are cleared in addition to the items cleared by
	this command.
	•	Clears input buffer.
	•	Clears macro.
	•	Return ASB mode according to the memory switch setting.
	•	Clears valid/invalid setting for panel switch.
[Sample Program]
	PRINT #1, CHR$ (&H1B) + “ ! “ + CHR$ (&H30) ;
	PRINT #1, CHR$ (&H1B) + “V” + CHR$ (1);
	PRINT #1, “AAA” + CHR$ (&HA);
	PRINT #1, CHR$ (&H1B) + “@”;
	PRINT #1, “AAA” + CHR$ (&HA);
[Print Results]	A A A
	A A A

— 23 —