ESC c5 n
[Function] | Enabling/Disabling Panel Switches | |
[Code] | <1B>H<63>H<35>H<n> | |
[Range] | {0 =< n =< FF(Hex)} | |
[Outline] | Selecting the LF switch valid/invalid. | |
| • “n” is valid only in the lowest bit (n0). | |
|
|
|
| n (Hex) | Condition |
| 0 | LFSW valid. |
| 1 | LFSW invalid. |
[Caution] | • When the panel switch is disabled with this command, the LF switch is disabled. | |
| Therefore, the paper cannot be fed by operating the LF switch. | |
| • When LF switch is set to Invalid, it cannot be cleared by the Initialize command | |
| (ESC @) but is cleared by turning power off. | |
[Default] | The initial value of n is “0”. | |
[Sample Program] |
|
|
PRINT #1, CHR$ (&H1B) + “c5” + CHR$ (0); ……When enabling the LF switch
PRINT #1, CHR$ (&H1B) + “c5” + CHR$ (1); ……When disabling the LF switch
— 37 —
