Citizen CMP-10 manual GS n m, Memory Switch OFF

GS ) n m

[Function]	Setting of printer flags
[Code]	<1D>H<29>H<n><m>
[Range]	{0 =< n =< 8(Hex)}
	{m = 0 or 1(Hex)}
[Outline]	This model has 8 memory switches and selecting, releasing, and changing a function
	is available with this command.
	Memory switch setting is retained even after printer power off.
	n specifies the number of memory switch to be operated.
	m specifies a selection.
	The contents of individual memory switches are as shown below.
	Memory Switch	OFF (0)	ON (1)
	1	Slach 0	Normal 0
	2	CR is ignored	CR has the same action as LF
	3	Default font A	Default font B
	4	Prints “Low Battery”.	Does not print “Low Battery”.
	5	ASB Invalid for default	ASB Valid for default
	6	Not in use
	7	IrDA protocol enabled	IrDA protocol disabled
	8	Shift JIS for default	JIS for default
[Caution]	The setting of the changed memory switch is enabled by resetting the power switch.

No. 8 is only for Japanese model.

— 42 —