[Items requiring caution]
•This command will only be effective when label printing has been selected.
•Because the moving to the top of the label passes over the first label in order to read in the label length and label interval, the printing position will be the top of the second label.
•Since the maximum length of the label is assumed to be 100 mm, an error will occur if the label exceeds 100 mm in length.
[Program example]
LPRINT CHR$ (&H1D) + "<" ;
GS A m n
[Name] | Correction of the label top position |
[Code] | <1D>H <41>H <m> <n> |
[Defined ranges] | 0 ≤ m ≤ 255 |
| 0 ≤ n ≤ 255 |
[Function] | Sets a correction amount with regard to the default position that is taken as the label top |
| position. |
| • m indicates the direction of the correction. |
| When m = <*******0>B, the correction will be applied to the label top position in the |
| forward direction. |
| When m = <*******1>B, the correction will be applied to the label top position in the |
| reverse direction. |
| • In indicates the correction amount, and this correction amount should be in 1/203 inch |
| units. |
[Items requiring caution]
•It will not be possible to move to a label position that exceeds the top edge of the label. In a situation where a label
102 | CITIZEN |
