Citizen Systems CBM-253 manual 2. 5 Interfaces, 2. 6 Data buffer, 2. 7 Paper and sensor

CBM-253 User’s Manual

2. 5 Interfaces

Serial interface (RS-232C)

Parallel interface

2. 6 Data buffer

4KB or 45B (Selectable by dip switch setting)

2. 7 Paper and sensor

Detection of whether there is paper or not. (Mechanical u nit)

Near-end detection (Paper holder unit)

2. 8 Auto-cutter

Rotary system, full cut type (AC-7)

Note:	Auto-cutter operation will not be possible while the printer is printing.
Note:	After switching on the printer. carry out cutting one time in order to determine the position.
Note:	In case of using thermal label paper, paste of label may stick to cutter blade.

2. 9 Drawer kick-out connector

Drawer kick-out drive terminal ⋅ 2

Detection of drawer open/close terminal ⋅ l

2. 10 Electrical specifications

Power source voltage	AC 120V+10% 50/60Hz
	AC 230V+10% 50/60Hz
	(Selected according to the product destination)
Power cable	For North America:	3-pin UL cable
	For Europe:	3-pin Class 1 cable
Power consumption	Approximately 20W	(during character printing)
	Approximately 40W	(during full printing)

10 CITIZEN