![Spare](/images/new-backgrounds/140044/14004491x1.webp)
2 DSW2 (Only mounted in serial interface printers)
DSW1 | ON | OFF | ||
1 | Xon/Xoff control | DTR/DSR control | ||
2 | Parity enabled | No parity | ||
3 | Even parity | Odd parity | ||
4 | 7 bits | 8 bits | ||
5 |
| Baud rate | ||
6 | (Refer to the table below.) | |||
7 | Data rejected during | '?' character printed | ||
a receiving error | during a receiving error | |||
| ||||
8 |
|
| Spare | |
Baud rate |
|
|
| |
|
|
|
| |
| Baud rate | |||
ON | ON |
| 1200 | |
OFF | ON |
| 4800 | |
ON | OFF |
| 9600 | |
OFF | OFF |
| 19200 |
Note 2 : The dip switch setting only become valid at the time when the power is switched on. According, if the setting are changed when the power is on, the switching will not be effe ctive.
34 | CITIZEN |