23
Virginmode
TVShape
4:3letterbox
4:3panscan
16:9
PressOK to continue
7Select the desired screen format position using Bor A. These
settings will only be used if you insert a DVD that contains this
information.
Which screen formats can I select?
'4:3 letterbox' for a 'wide-screen' (cinema format) picture with black bars at
the top and bottom.
'4:3 panscan' for a full-height picture with the sides trimmed.
'16:9' for a wide-screen TV set (screen edge ratio 16:9) ?
8Confirm with OK .
Virginmode
Country
Austria
Belgium
Denmark
Finland
France
PressOK to continue
9Select the country of your residence with Bor A.
If your country does not appear, select 'Other'.
Why do I have to select a country?
To call up the specific settings for the respective country, you must first install
the country. ?
0Confirm with OK .
AAfter you connect the aerial (or cable TV, satellite receiver, etc.) to
the DVD recorder, press OK .
The automatic TV channel search starts. 'WAIT' will appear on the
display.
Installation
Autom.search
Searchingfor TV channels
00Channels found
Pleasewait
aThe DVD recorder cannot find any TV stations
bSelect channel 1 on the TV set. Can you see the stored TV channel on the
TV set?
If not, check the cable connection from the aerial (aerial socket) to the
DVD recorder and to the TV set.
bPlease have patience.
The DVD recorder searches the entire frequency range in order to find
and save the largest possible number of TV channels.
bIf you have not connected an aerial, go through all the basic settings right
to the end and then, if you wish, start the automatic search (see 'Automatic
TV station search'). Problem
BWhen the automatic TV channel search is complete, 'Autom. search
complete' will appear on the TV screen.
'Time', 'Year', 'Month', 'Date' will then appear on the TV screen.
Autom.search
Autom.search complete
00Channels found
Time 20:01
Year 2003
Month 01
Date 01
To continue
PressOK
CCheck if the time in 'Time' is correct.
ÀIf required, change the time with the number buttons 0..9 on your
remote control.
ÁSelect the next line with Aor B.
ÂCheck if the displayed settings for 'Year', 'Month' and 'Date' are
correct.
ÃWhen all information is correct, save by pressing OK .
ENGLISH
Installing your DVD recorder