'Video shift'

Use this feature to adjust the position of the picture on your TV left or right using D , C to suit your TV set.

'RGB attenuation'

With the buttons D , C you can attenuate or amplify the RGB-signal on the input socket EXT 2 AUX-I/OThese setting concerns only the input signal. The RGB output signal on the socket EXT 1 TO TV-I/Oleaves unchanged.

'Video output'

Since RGB and S-Video signals sometimes use the same connections on a scart cable, the two signals cannot be transmitted simultaneously. With these settings, you can decide whether RGB or S-Video signals should be transmitted. This setting affects only the scart sockets of the DVD recorder ( EXT 1 TO TV-I/Ooutput socket and EXT 2 AUX-I/Oinput socket).

Please also observe which signals are available at which scart socket of the TV set or how the scart sockets need to be switched.

If necessary, consult the instruction manual of your TV set.

Which settings can I select?

'RGB + CVBS' Depending on the TV set you are using, switching between the 'RGB' and the 'Video(CVBS/FBAS)' signal is done automatically. If the picture scrolls to the side or the colour quality is poor on some TV sets when the setting is 'RGB + CVBS', you must select 'CVBS only'.

'S-video only' Both scart sockets ( EXT 1 TO TV-I/Ooutput socket and EXT 2 AUX-I/Oinput socket) process only the S-Video signal. In case the scart socket of the TV set is not suitable for S-Video (Y/C) signals, you will only see a black-and-white picture, although the recording will be made in colour.

Moreover, only the video (CVBS, FBAS) signal will be used for recordings via the EXT 1 TO TV-I/Oscart socket.

Please observe that when making recordings from a video recorder that transmits only video (CVBS/FBAS) signals through the scart cable, recordings via scart socket EXT 2

AUX-I/Omay be made in black and white. Therefore, use this setting with caution.

'CVBS only' Only the video (CVBS/FBAS) signal is transmitted regardless of the video signals (RGB, Y/C) on the scart sockets. This setting is selected automatically when no 'RGB' or 'S-VIDEO' signal is detected at the scart socket.

When selecting the settings 'S-video only' or 'CVBS only', the RGB signal

?

is switched off.

ENGLISH

User preferences

93

Page 101
Image 101
Philips DVDR 77/00, DVDR 77/02 manual Video shift, RGB attenuation, Video output, Which settings can I select?