Creating an album

You can store pictures contained in a memory card or DVD+RW/+R in a so-called 'Albums' in a different order. Albums are binary files containing information on the orientation and storage location of the pictures.

Albums from a medium that cannot be recorded by the DVD recorder (Picture CD, CD-ROM, finalised DVD+R), will be stored in the internal memory of the DVD recorder. You can store up to a maximum of 100 pictures per album in 20 albums.

Adding pictures to an album

1Select 'Albums' in the 'Media menu' using B or A and confirm with C .

2An overview of the albums you already created will appear. Select 'New album' with B to create a new album.

3Press C . The menu 'Album Settings' will appear.

In a new album, the line 'Add photos' is already highlighted.

4Confirm with OK .

5The roll overview will appear.

6Use B or A to select the roll from which you want to add pictures to the album.

7Confirm with C .

The picture overview will appear.

8Use D , C , B , A to select the pictures you want to add to the album.

9Confirm each selected picture with SELECT . Do not pay attention to the order of the pictures. You can change it later in the album.

Select all pictures

 

 

 

If you want to store many pictures in the album, select 'Select all'.

 

 

 

Then use SELECT to select the pictures you don't want to add to

the

album.

 

Tip

These pictures will be deselected.

 

0Keep pressing A until the menu bar is highlighted.

ASelect 'Done' with D or C to add all selected pictures to the album.

BConfirm with OK .

The album will be created. '￿￿￿￿￿￿' will appear in the display while the album is created.

Do not remove the medium from the device!

CThe menu 'Album Settings' will then automatically appear.

ÀTo add additional pictures, use B to select 'Add photos' and confirm with OK .

ÁRepeat steps 5to Àuntil the album contains all the desired pictures.

58

The 'Digital Photo Manager'

Page 66
Image 66
Philips DVDR 77/02, DVDR 77/00 Creating an album, Adding pictures to an album, Do not remove the medium from the device