Philips DVDR 77/00, DVDR 77/02 manual Connecting the DVD recorder

3Insert one end of the supplied video (CVBS) cable into the yellow Cinch socket VIDEO (CVBS) OUT at the back of the DVD recorder and the other end into the video input socket (usually yellow) on the TV set (usually labelled 'Video in' or 'AV in'. See TV operating instructions).

4Insert one end of the supplied audio (Cinch) cable into the red/white Cinch socket AUDIO L/R OUT at the back of the DVD recorder and the other end into the audio input socket (usually red/white) on the TV set (usually labelled 'Audio in' or 'AV in'. See TV operating instructions).

5Read the next chapter 'Connecting additional devices' on how to connect additional devices (satellite receivers, videorecorders,...) to the input-/output sockets.

6Switch on the TV set. Switch the TV set over to the Video/Audio input socket or select the relevant programme number. Please see your TV's operating instructions for the programme number you need.

7Insert one end of the supplied mains cable into the mains socket

4MAINS at the back of the DVD recorder and the other end into the wall socket.

The most important features of the DVD recorder will appear in scrolling text on the display. After the first installation is completed this function will be switched off. How you switch on this function again, read in the chapter 'User preferences' in the section 'standby'.

8Switch on the DVD recorder using STANDBY-ONm . '￿￿ ￿￿ ￿￿￿' will appear on the display.

Then, read the paragraph on 'Initial installation' in 'Installing your DVD recorder'.

ENGLISH

Connecting the DVD recorder 17