Philips DVDR 77/02, DVDR 77/00 Connecting with a scart cable and Easy Link, Connecting with an S

When you install your DVD recorder for the first time, select one of the following options:

'Connecting with a scart cable and Easy Link'

If your TV set is equipped with 'Easy Link, Cinema Link, NexTView Link, Q-Link, Smart Link, Megalogic, Datalogic, ...' and you wish to use a scart cable.

'Connecting with a scart cable without Easy Link'

If your TV set is not equipped with 'Easy Link, Cinema Link, NexTView Link, Q-Link, Smart Link, Megalogic, Datalogic, ...' and you wish to use a scart cable.

'Connecting with an S

If your TV set is equipped with an S-Video(SVHS) socket.

'Connecting with video(CVBS) cable'

If your TV set is equipped only with an video(CVBS) socket.

Connecting with a scart cable and 'Easy Link'

Your DVD recorder can exchange information with your TV set using 'Easy Link'. Your TV channels can also be transferred in the same order from your TV set to your DVD recorder using 'Easy Link'.

Please see your TV's operating instructions.

Have the following cables ready:

an aerial cable (1, supplied), a mains cable (2, supplied), a special scart cable (3, suitable for Easylink).

1Switch off your TV set.

2Remove the aerial cable plug from your TV set. Insert it into the ANTENNA IN socket at the back of the DVD recorder.

3Insert one end of the supplied aerial cable into the TV OUT socket at the back of the DVD recorder and the other end into the aerial input socket at the back of the TV set.

4Plug in a full-pin scart cable (all 21 contacts wired) into the scart socket EXT 1 TO TV-I/Oat the back of the DVD recorder and the corresponding scart socket - suitable for Easylink - at the back of the TV set (see TV set operating instructions).

5Read the next chapter 'Connecting additional devices' on how to connect additional devices (satellite receivers, videorecorders,...) to the input-/output sockets.

12 Connecting the DVD recorder