34
Setting the time and date
If the display shows an incorrect time or '--:--', the time and date must be reset manually.
'SMART CLOCK' automatically sets the time and date using the information transmitted by the
TV channel. Normally the TV channel stored at programme number 'P01' is used. In the 'Clock
preset' line you can select the programme number (channel name) whose TV channel transmits
this information.
If the time/date is not displayed correctly you need to choose the 'Off' setting in the 'Clock
preset' line and set the date and time manually.
1Press SYSTEM-MENU on the remote control. The menu bar
appears.
2Select 'A' symbol with Dor C.
3Select 'Installation' using Bor Aand confirm with C.
4Select 'Time/Date' using Bor Aand confirm with C.
Installation
Time/Date
Time 20:00
Year 2003
Month 01
Date 01
Clockpreset 01
To exit press
SYSTEMMENU
5Check if the time in 'Time' is correct. If required, change the time
with the number buttons 0..9 on your remote control.
6Check 'Year', 'Month' and 'Date' in the same way. To move between
the fields, use Bor A.
aTime/date is displayed incorrectly despite manual setting
bWith 'SMART CLOCK', time/date is transferred from the TV channel saved
on 'P01' and automatically corrected.
You can either enter another TV channel for transferring the data or
disable the function.
In the line 'Clock preset' select the relevant TV channel with Dor C.
To disable, select 'Off'. Problem
7Check the displayed settings and confirm with OK .
'Stored' will appear briefly on the screen.
8To end, press SYSTEM-MENU .
Installing your DVD recorder