75
Direct Record
Can you record the right TV channel in seconds when the DVD recorder is switched off? No
problem. If recording is started manually, the switchedoff DVD recorder takes the current TV
channel from the TV set via the scart cable.
You will find more information on how to switch 'Direct record' on or off in the next section
'Direct record'.
How does Direct Record work?
The DVD recorder compares the TV channel selected on the TV set with its
stored TV channels via the scart cable. If the same TV channel is found, it
switches the DVD recorder to the corresponding programme number and
starts recording.
Please do not change channel on the TV during the search. This could affect
the tuning of the DVD recorder. ?
1On the TV set, select the programme number you want make the
recording from.
2Press REC/OTR nwith the DVD recorder switched off.
aThe display will read 'WAIT'
bThe DVD recorder is comparing its saved TV channels with those of the
TV set. Please do not change the TV channel on the TV set while 'WAIT'is
shown in the display.
a'NOTV' appears in the display
bThis TV channel could not be found in the DVD recorder's memory.
Check that all TV channels saved on the TV set are available on the DVD
recorder. If required, save any missing channels. Please read 'Manual TV
channel search' in 'Installing your DVD recorder'.
bCheck the connectors at both ends of the scart cable.
bCheck your TV's operating instructions to see which scart socket is used
for video signals.
bIf the problem persists, you won't be able to use this feature. Problem
3Stop recording with STOP h.
ENGLISH
Manual recording