Messages in the DVD recorder display
READING The following messages may appear in your DVD recorder display
IS TV ON? The DVD recorder is in initial installation mode. Switchthe TV on, then
read the paragraph on 'Initial installation' in 'Installing your DVD
recorder'.
NO SIGNAL No input signal available (signal inadequate or unstable)
MENU The menu on the screen is active
OPENING Disc tray opening
TRAY OPEN Disc tray open
CLOSING Disc tray closing
READING Disc being read
MENU UPDT Once recording has been successfully completed the table of contentsis
created.
INIT MENU The menu structure is created after the first recording has been made
on a new disc
COPY PROT You received a copy-protected signal. This may come from a
copy-protected DVD/videotape of a DVD/video playeror from a TV
channel.
WAIT Please wait until this message disappears. The DVD recorderis busy
performing a task.
NO DISC A disc has not been inserted for recording. If a disc has been inserted, it
cannot be read.
INFO Information about the inserted DVD is displayed on the screen
BUSY The DVD recorder is processing the changes to make them DVD
compatible
ERASING The entire disc is erased
EMPTYDISC The disc inserted is either new or has been completely erased (no
recordings).
PROTECTED The disc is protected against recording.
MAX TITLE The maximum number of titles per disc has been reached. The
maximum number of titles on a disc is 48.
MAX CHAP The maximum number of chapters within a title/or the disc has been
reached. The maximum number of chapters within a title is 99, on a disc
124.
DISC FULL The disc is full. There is no space for new recordings
PAL DISC A disc with PAL recordings has been inserted. The machine is trying to
record an NTSC signal. Insert a new disc or one that contains NTSC
recordings.