Philips DVDR 77/02, DVDR 77/00 manual Automatic TV channel search, Deleting sorting

a'￿￿￿￿' will appear in the display. The DVD recorder is not
receiving a video signal from the TV set.
b Chech the connectors at both ends of the scart cable.
b Check your TV's operating instructions to see which scart socket is used
for video signals.
b If the problem persists, you won't be able to use this feature.	Problem
Please read 'Sorting and deleting TV channels manually'.

0Wait until for example '￿￿ ￿￿' appears in the display.

A Select the next programme number on the TV set, e.g. '2'.

￿￿ ￿￿ B Confirm with OK on the DVD recorder remote control.

Deleting sorting

You can delete incorrect TV channel sorting by pressing D .

Tip

CRepeat steps 0to Buntil you have assigned all the TV channels from your TV set.

ÀTo end, press SYSTEM-MENU .

Automatic TV channel search

During installation, all available TV channels are searched for and stored. If the channel assignments of your cable or satellite TV provider change or if you are reinstalling the DVD recorder, e.g. after moving house, you can start this procedure again. This will replace the stored TV channels with the new ones.

My TV set has Easylink
With Easylink, you can search for and store TV channels only on the TV set.
These settings are accepted by the DVD recorder. Use this function to start	Tip
the transfer of TV channels from the TV set.

1Switch on the TV set. If required, select the programme number for the DVD recorder.

2Switch on the DVD recorder using STANDBY-ONm .

3Press SYSTEM-MENUon the remote control. The menu bar appears.

4Select 'A' symbol with D or C .

5Select 'Installation' using B or A and confirm with C .

6 Select 'Autom. search' using B or A .

30 Installing your DVD recorder