90
How to change or delete a programmedrecording (TIMER)
1Switch on the TV set. If required, select the programme number for
the DVD recorder.
2Press TIMER son the remote control.
The programming mode selected last is marked.
3Select 'Timer List' using Bor Aand confirm with C.
Timer
TimerList
Date
01
--
Prog.
BBC1
-----
Start
20:15
--:--
VPS
PDC
*End
21:30
--:--
Rec
Mode
M2
--
Totalrecord time:01:15
To change
Press› To exit
PressTIMER
4Select the programmed recording (TIMER) you want to check, change
or delete with Bor A.
Delete programmed recording
1Press the CLEAR button.
2Confirm with OK .'Timer Cleared' will briefly appear on the TV
screen.
'-- ---' appears rather than the displayed values
3To end, press TIMER s.Tip
5Press C.
Select the input field with Dor C.
If required, change the information with A,Bor the number
buttons 0..9 .
6Confirm with OK .
7To end, press TIMER s.
8Switch off with STANDBY m.
'NexTView Link'
This DVD recorder is equipped with the 'NexTView Link' feature. If your television is also
equipped with this function, you can mark TV programmes on the television for programming.
These TV programmes will automatically be transmitted to a TIMER block on the DVD
recorder. If you clear the marking of the TV programme on the television, the corresponding
TIMER block on the DVD recorder will also be cleared.
For more information, read the instruction manual of your TV set.
Programming a recording (TIMER)