Pioneer DVR-540H-S, DVR-543H-S Press ‘VCR Plus+’ to display the VCR Plus+ program screen

Recording 05

just input the corresponding code. The date, start, stop and channel settings are made automatically. All you have to do is tell the recorder the recording mode, and whether it’s a once-only recording or a regular recording.

*VCR Plus+ and PlusCode are registered trademarks of Gemstar Development Corporation.

The VCR Plus+ system is manufactured under license from Gemstar Development Corporation.

1Press ‘VCR Plus+’ to display the VCR Plus+ program screen.

You can also access this screen from the Home Menu (press HOME MENU, select Timer Recording, then

VCR Plus+).

PlusCode#

1 2 3

4 5 6 Cancel

7 8 9 Details

0 Clear Enter

•Use the number buttons to enter the PlusCode number. (To clear the last digit entered, press CLEAR.)

•You can also use the

buttons to select digits from the on- screen display.

2After making the settings, select ‘Enter’ and press ENTER.

The timer recording screen appears with the timer program you just set.

3Confirm that the settings are correct. If the channel number isn't displayed, use

the	buttons to highlight CH, then use
the	buttons to set the correct channel
number.

•If the channel number is set, but incorrectly, set up the guide channel (see VCR Plus+ CH Setting on page 111).

4Select ‘Store Program’ to finish.

•Other options in the same menu panel allow you to name the program, and change the recording destination and/or recording mode.

Checking/editing timer recording settings

You can check and/or edit the timer recording settings made by the VCR Plus+ system by selecting Details from the PlusCode# setting screen.

ENTER

1Select ‘Details’ from the

PlusCode# setting screen.

The Timer Program Set screen appears, filled out with the timer recording details.

2Check and edit the fields as necessary.

See Setting a manual timer recording on page 42 for more on this.

ENTER

3Select ‘Store Program’ to save the timer program and exit.

41

En