Pioneer DVR-540H-S Also Deleting a timer program on, Enter the timer recording settings

Recording 05

also Deleting a timer program on page 44.

2Select ‘New Input’ to set a new timer program, then press ENTER.

Timer Program Set
Manhattan Open Tennis
CH	Date	Start		Stop	Extend
10ch	EVERYDAY	6:00PM		7:00PM	30 min
					Store Program
Detailed Settings			Enter Details
Record To			HDD
Recording Mode			XP		Set Detailed
	Auto Replace Rec.		On
Genre			No Category		Set Title Name
Dual Mono Recording			L		Cancel
HDD Recording Format			Video Mode On

3 Enter the timer recording settings.

Use the	buttons to select a field; use
the	buttons to change the value.

•CH – Choose a channel (2 to 69 for antenna channels; 1 to 125 for cable, excluding skip channels), or one of the external inputs from which to record.

•Date – Choose a date up to one month in advance, or select a daily or weekly program.

•Start – Set the recording start time.

•Stop – Set the recording end time (maximum length of a timer recording is 24 hours).

•Extend – Extend the end time of the timer recording (select Off, 30, 60, 90 or 120 mins).

4If you want to change the recording mode, recording destination, etc., select ‘Set Detailed’.

In this area you can set:

Record to – Select HDD for hard disk recording or DVD for DVD recording. Select HDD for Auto Replace Recording (daily or weekly timer recording only).

Recording Mode – Select XP, SP, LP, EP, SLP or SEP, (See Setting the picture quality/ recording time on page 37). If Manual Recording is on, then you can also select the LPCM setting, or MN (press ENTER then use

the buttons to select the level).

Auto Replace Rec. – automatically erases the previous daily or weekly recording when the next one is recorded.

Genre – Select a record genre (for HDD recording only).

Dual Mono Recording – Select which channel of a dual mono broadcast to record (necessary if recording to a Video mode DVD).

HDD Recording Format – Select Video Mode On or Video Mode Off depending on whether you need high-speed copying to Video mode DVD capability or not.

5After entering all the timer recording information, highlight ‘Store Program’ and press ENTER.

The timer recording list screen is displayed again. The timer program you just input appears in the list. The rightmost column shows various timer recording status messages:

•OK – Can be recorded.

•Time Over – Not enough space on the HDD (the recording won’t finish).

•Over 12h – Recording time of over 12 hours set (when recording to the HDD the recording will be split into two titles).

•Overlap – Two timer programs partially or completely overlap. The one starting earlier will take priority.

•Until ... (e.g., Until 8/13) – For a regular recording, the last program that could be recorded is shown.

•Data Over –Can’t record because the disc management area of the disc is full.

43

En