Pioneer DVR-540H-S, DVR-543H-S Easy Timer Recording, Set the recording quality

Recording 05

You can set the recording quality for your timer recording in the same way as for a regular recording, but with the added option of an AUTO mode, which maximizes the recording quality for the space available on the disc (if recording to DVD), or to fit on to a blank DVD disc (if recording to HDD).

You can set timer recordings to record to a recordable DVD or to the hard disk drive. For regular (daily or weekly) HDD timer recordings that you don’t need to keep, you can use the Auto Replace Recording feature to automatically replace the previous timer recording with the new one. Note that when you use this feature, the previous recording made on that timer program will be replaced by the next one, regardless of whether you have watched it yet or not.

You can also set the recorder so that it will adjust the recording quality to try and fit the recording on to the disc if it would not otherwise fit at the recording quality you set (see Optimized Rec on page 114 for more on this).

Finally, if you set a timer recording to record to DVD but there isn’t a recordable DVD loaded at the time of the recording, the Recovery Recording feature will automatically record the program to the HDD for you.

Important

•A timer recording can’t be set if there are already 32 timer programs waiting to be recorded.

•Timer recording will not start if:

–The recorder is already recording.

–A disc is being initialized, finalized or unfinalized.

•Timer recording will start when the operation preventing timer recording has finished.

•The timer indicator ( ) lights in the front panel display when the timer is active. If the indicator is blinking it means that (for a DVD timer recording) there is no disc loaded, or the disc loaded is not recordable (for an HDD timer recording it means that the HDD is not recordable).

•Approximately two minutes before a timer recording is set to start, the recorder will go into timer recording standby. In timer recording standby you cannot use some functions.

•The maximum length for timer recordings made to the HDD is 24 hours. However, because one title (HDD) is limited to 12 hours, recordings over 12 hours will be spread over two titles. Note that there will be a break in the recording of a few seconds between titles.

Easy Timer Recording

As the name suggests, Easy Timer Recording makes setting up a timer recording as simple as possible.

HOME MENU

1 Select ‘Timer Recording’ then ‘Easy Timer’ from the Home Menu.

2 PREV NEXT Set the TV channel to record.

Easy Timer Recording
AM				PM
8:00	9:00	10:00	11:00	12:00		1:00	2:00
1/01
1/02
1/03
1/01 SUN			9:30 AM		–	––:––
	7ch	REC MODE		SP		HDD/DVD	HDD

REC MODE

3 Set the recording quality.

39

En