Pioneer DVR-543H-S, DVR-540H-S operating instructions Initial Setup menu, Pcm, Mpeg PCM

14The Initial Setup menu

Setting Options Explanation

When recording dual mono audio to DVD in VR mode (except in LPCM mode), or to HDD with HDD Recording Format set to Video Mode Off (except in LPCM mode), both audio channels are recorded and you can switch to the one you want on playback.

Audio Out

Digital Out	On •	Activates the digital audio output.
	Off	Deactivates the digital audio output.

When set to Off, all the following Audio Out settings are grayed out.

Dolby Digital Out	Dolby Digital •		Output a Dolby Digital signal when a Dolby Digital
			source is being played.
	Dolby Digital		Convert Dolby Digital sources to Linear PCM output.
	PCM		Use if your connected equipment doesn’t have a
			Dolby Digital decoder.
DTS Out	On •		Output a DTS signal when a DTS source is being
			played.
	Off		Switch off the digital output when a DTS source is
			being played. Use when your connected equipment
			doesn’t have a DTS decoder. In this case, use the ana-
			log audio outputs.
96 kHz PCM Out	96 kHz	48 kHz • Convert 96 kHz digital audio sources to 48 kHz out-
			put. Use if your connected equipment doesn’t sup-
			port 96 kHz sampling rate.
	96 kHz		Output 96 kHz digital audio when a 96 kHz source is
			being played.
MPEG Out	MPEG		Output an MPEG audio signal when a source using
			MPEG audio is being played.
	MPEG	PCM •	Convert sources with MPEG audio to Linear PCM out-
			put. Use if your connected equipment doesn’t have
			an MPEG audio decoder.
Audio DRC	On		Switches on Audio DRC (Dynamic Range Control).
			Use when listening to Dolby Digital material at low
			volume.
	Off •		Switches off Audio DRC.

Audio DRC is not effective when listening via the digital output when the Dolby Digital Out setting is set to Dolby

Digital.

112

En