Pioneer DVR-540H-S, DVR-543H-S operating instructions Next

The Initial Setup menu		14
Setting	Options	Explanation
Manual CH Setting	Next Screen	Proceed to the next screen if you need to adjust any
		of the settings made by auto tuning.

•Change channels using the CH +/– buttons.

•To skip the displayed channel (because there is no station assigned to that channel), change the Skip setting to On.

•To manually fine tune the channel, change the AFT setting to Off then adjust the Level setting.

VCR Plus+ CH		Guide channels are used by the VCR Plus+ system
Setting		so that the channel number specified in the VCR
		Plus+ programming numbers can be guaranteed to
		correspond to the correct station. Look in your TV
		guide to see which channel numbers should be
		assigned to which guide channels.
		• Use the	buttons to change the guide channel
		for setting.
		• Use the	buttons to change the channel
		number.
		• Use the PREV	/ NEXT	button to display
		the previous/next 10 guide channels.
		• To return to the Initial Setup menu, press ENTER.
Video In/Out
Component Video	Interlace •	Select if your monitor/TV is not compatible with pro-
Out		gressive-scan video.
	Progressive	Select if your monitor/TV is progressive-scan compat-
		ible. Check the operating instructions that came with
		your monitor/TV if you’re not sure.
Audio In
External Audio	Stereo •	Select if the audio from the currently selected exter-
		nal input is standard stereo.
	Dual Mono	Select if each channel carries a separate soundtrack.
Dual Mono	L •	Select to record the left channel of an external dual
Recording		mono source when recording to DVD in Video mode,
		to HDD with HDD Recording Format set to Video
		Mode On, or in LPCM mode.
	R	As above, but for right channel recording.

111

En