Pioneer DVR-543H-S, DVR-540H-S Editing a timer program, Deleting a timer program

05Recording

•Cancel Once – A regular timer program is set to skip.

•Can’t Rec – Not possible to record.

•Title Over – Can’t record because there is already the maximum number of titles on the disc (HDD: 999; DVD: 99).

•Recording – The program is currently recording.

•Standby – The recorder is in timer recording standby.

•nothing displayed – Another timer recording or copying is in progress.

6To exit the timer recording screen, press HOME MENU.

Tip

•To enter a title name for the timer recording in advance, select Set Title Name and follow the on-screen display.

Note

•If you set a DVD timer recording but there is no recordable DVD disc loaded, or the disc loaded doesn’t have enough free space for the complete recording, Recovery is shown. In this case (unless you load a suitable disc before the recording actually starts), the recorder will use the HDD for recording. (The message Can’t Rec will appear if there are already 999 titles on the HDD or if there is not enough free space on the HDD for recording.)

•For a DVD timer recording, if Optimized Rec (see Optimized Rec on page 114) is set to On, the recorder will adjust the recording quality to try and fit the recording on the disc. If the recording will not fit onto the disc even on MN1 (MN4 for DVD+R/+RW) recording

44

quality then the Recovery Recording feature will automatically make the recording to the HDD instead.

•If there is very little free space left on the HDD, an Auto Replace Recording may not complete successfully.

•If the HDD is being used for playback or high-speed copying when an Auto Replace Recording is due to start, the new timer recording will not replace the old one. However, the next time the timer recording starts, both of the older two programs will be erased.

Editing a timer program

You can change any of the settings in a timer program before the recording is due to start.

1Press HOME MENU, select Timer Recording, then Timer Recording.

2Highlight the timer program you want to change.

3 Press then select ‘Modify’ from the command menu panel.

Alternatively, press ENTER.

The Timer Program Set screen appears from which you can edit the settings.

4Edit the timer recording settings as necessary.

5Select ‘Store Program’ to finish. Confirm the settings you made from the following screen.

Deleting a timer program

You can delete timer programs you no longer need.

1Press HOME MENU, select Timer Recording, then Timer Recording.

En