Pioneer DVR-540H-S, DVR-543H-S operating instructions Playback, Playing DVD discs, Start playback

Playback 06

•If you want to play a DTS audio CD, please first read the note on page 55.

PLAY

3 Start playback.

•If you’re playing a DVD-Video or Video CD, a disc menu may appear when you start playback. Use the

buttons and ENTER to navigate DVD disc menus, and the number buttons and ENTER for Video CD menus.

•When playing video from the HDD, playback will automatically stop after the end of a title is reached.

•There may be a slight pause when playback switches from the first to the second layer of a dual-layer disc.

•See the following sections for more details on playing specific kinds of discs.

STOP

4 Press to stop playback.

5When you’ve finished using the recorder, eject the disc and switch the recorder back into standby.

Playing DVD discs

The table below shows the basic playback controls for DVD-Video, and recordable DVD discs.

PLAY Press to start playback.

If RESUME is displayed on- screen, playback starts from the place last stopped.

STOP Press to stop playback. You can resume playback

from the same point by press- ing PLAY. (Press STOP again to cancel the resume function.)

		Pauses playback, or restarts
	PAUSE
		playback when paused.
		Press to start scanning. Press
		repeatedly to increase the
		scanning speed.
		Press to skip to previous/next
PREV NEXT
		chapter/title. (During play-
		back you can also use the
		front panel CH +/– buttons.)
		DVD+R/DVD+RW only: PREV
		may not always skip to
		the previous title.

ABC DEF

GHI JKL MNO

PQRS TUV WXYZ

CLEAR

ENTER

Except VR mode: During play- back, enter a chapter number then press ENTER to skip directly to that chapter within the currently playing title. On some discs, you can also use the number buttons to select numbered items in the disc menu.

VR mode only: During play- back, enter a title number then press ENTER.

All: Press CLEAR to clear a number entry and start again.

53

En