Citizen Systems iDP-3210 user manual Command List, Esc Sp, Esc =

iDP-3210 User’s Manual

9 PRINT CONTROL FUNCTION

9.1 Command List

	CONTROL CODE	FUNCTION	PAGE
1	HT	Horizontal tab command
2	CR	Print command
3	LF	Printing and paper feed
4	ESC SP	Setting the right space amount of the character
5	!	Collective specifying printing mode
6	%	Specifying/canceling download character set
7	&	Defining download characters
8	*	Specifying the bit image mode
9	-	Specifying/canceling underline
10	2	Specifying 1/6-inch line feed rate
11	3	Setting line feed rate n/203 inch
12	@	Initializing the Printer
13	D	Setting horizontal tab position
14	E	Specifying/canceling highlighting
15	G	Specifying/canceling double printing
16	J	Printing and feeds paper n/203 inch
17	R	Selecting the international characters
18	c3	Setting of paper end sensor effective for outputting a signal for no
		paper(Parallel Mode Only)
19	c4	Setting of paper end sensor effective for print stop
20	c5	Enabling/disabling the panel switches
21	d	Printing and feeding the paper by n lines
22	p	Generating the specified pulse(Drawer Kickout)
23	t	Selecting the character code table
24	v	Transmitting the printer status(Serial Mode Only)
25	u	Transmitting the status of peripheral equipment(Serial Mode Only)
26	{	Specifying/canceling the inverted characters
27	V	Specifying/canceling the 90° - right-turned characters
28	$	Specifying the absolute positions
29	¥	Specifying the relative positions
30	GS k	Printing the bar code
31	w	Selecting the horizontal size (scale factor) of bar code
32	h	Selecting the height of the bar code
33	H	Selecting the font of HRI character
34	*	Defining the download bit image
35	/	Printing the download bit image
36	:	Starting/ending macro definition
37	^	Executing the macro
38	ESC =	Data input control
39	a	Aligning the characters
40	i	Full cut
41	m	Partial cut

CITIZEN 45