iDP-3210 User’s Manual

(14) Specifying/canceling highlighting (ESC E n)

Code : [1B]h + [45]h + n

* {0 ≤ n ≤ FF} Data is described in Hex code. Specifying/canceling the highlighted characters.

"n" is valid only for the lowest bit (n0).

Control by the lowest bit (n0) is shown as follows:

n0

Type

0Canceling highlighting.

1Specifying highlighting.

• This is effective to all characters.

• Dot configuration of a highlighted character includes one extra dot added at its side.

(15)Specifying/canceling Double Printing (ESC G n)

Code : [1B]h + [47]h + n

* {0 ≤ n ≤ FF} Data is described in Hex code. Specifying/canceling the double printing.

"n" is valid only for the lowest bit (n0).

Control by n is shown as follows.

n0

Type

0Canceling double printing.

1Specifying double printing.

The print result of Double printing and highlight character printing is completely same

.

(16) Printing and feeding paper n/203 inch (ESC J n)

Code : [1B]h + [4A]h + n

* {0 ≤ n ≤ FF} Data is described in Hex code. Prints data inside the print buffer and feeds paper by n/156 inch.

Specified volume does not remain.

The beginning of the line is to be considered as the next printing start position.

CITIZEN

51

 

Page 51
Image 51
Citizen Systems iDP-3210 user manual Citizen