iDP3110 User's Manual
CITIZEN 22
As this printer prints out 4 dot lines as one unit, the lacking data is output as space once the data for 4 dot lines
are read in or the output of data specified in n1, n2 and n3 has finished.
Note 1) If n1 = 23 is specified in iDP3110-40 specification, 4 dots from the topmost dot (MSC DOT)
become invalid. This is due to the fact that the output position for a single line consists of 180
dots.
Note 2) Although the printer returns to text mode when bit image mode printout is completed, line
spacing is set to 0 to enable further output in the bit image mode. Line feed is required in order
to commence text mode output.
For bit image printing, inverted printing is not performed but normal printing, even if the DIP
switch 1 is set to “ON”.
c) International character setting (ESC + R + n)
By entering the code ESC + R + n, characters input hereafter are set to the characters for the following
countries.
Then n value and country setting is as indicated in the table below.
n Country n Country
0 America 5 Sweden
1France 6 Italy
2Germany7 Spain
3 England 8 Japan
4Denmark
n other than that specified becomes invalid and the setting prior to the invalid specification is employed.
When the printer is turned on or RESET, the country is set to n = 0 (America).