iDP3110 User's Manual
CITIZEN 25
d-4) In case of iDP3110-40* (40 columns) specification
Pattern data to be registered must consist of 7 bytes per character.
That is, pattern data configured by a 7 × 8 dot matrix is broken up into 7 vertically positioned units
each of which is represented by 1 byte of data. All together, 7 bytes of data are transmitted.
<Example> When transmitting the following data,
As the model utilizes the half-dot printing method, it is not capable of positioning successive dots in
the printing direction (between print). Therefore, pattern specification in the position “*” to the right
of the position “•” in the diagra m above will not be registered as pattern data.
e) Continuous paper feed command (ES + B + n)
By entering the code ESC + B + n, continuous paper feed operation is carried out for n dot lines.
The n should be an even number in the range of 4 ≤ n ≤ 255. If an odd number is entered, the dot line is set
to “n-1”. The command is canceled if a number exceeding this range is specified.
If printout data is stored within the input buffer when the command is entered, the printer commences with
the printout. However, the print line (10 dot line) will be included in the line feed value “n”. Therefore, if
4 ≤ n ≤ 9 is specified, line space shall be set as “0”.